MeRSZ online
okoskönyvtár
Több száz tankönyv egy helyen.
Online. Bárhol. Bármikor.
Fluid Mechanics Measurements
Investigation of a chemical industrial solvent supply system
In a chemical industry plant, several types of solvents are used. The solvents are distributed toward the technological reactors from a central reservoir plant. A typical fluid machinery for liquid handling in the chemical industry is the pump with magnetic clutch, for which some schemes are presented in Figure 8.13.1. By means of the magnetic clutch, torque is transmitted from the driving electric motor to the pump impeller without any solid contact. Therefore, motionless sealing surfaces can be realised, and static seals can be applied, thus eliminating the risk of leakage (which is "natural" in the case of classic moving sealing techniques, e.g. a slip ring). With such pumps, a fully closed transport technology can be realised even for the aggressive and toxic liquids that occur frequently in the chemical industry.
Tartalomjegyzék
- FLUID MECHANICS MEASUREMENTS
- COPYRIGHT PAGE
- FOREWORD
- LIST OF SYMBOLS
- ABBREVIATIONS
- 1. INTRODUCTION AND OBJECTIVES
- 2. PROBES AND SENSORS FOR MEASUREMENT OF THE TEMPORAL MEAN PRESSURE
- 3. VELOCIMETERS
- 4. TEMPERATURE MEASUREMENT
- 5. MEASUREMENT OF UNSTEADY PRESSURE
- 6. TRADITIONAL MEASUREMENT OF VOLUME FLOW RATE
- 7. SPECIALISED FLOWMETERS
- 8. INDUSTRIAL EXAMPLES
- 8.1. Extension of a food industry cooler system
- 8.2. Optimisation of a mineral wool production process
- 8.3. Proposal for noise reduction in an aerobic wastewater treatment plant
- 8.4. Diagnostics on the air supply system of a gas motor power plant
- 8.5. Measurements on a silencer built in a cement industry flue gas duct
- 8.6. Development of an axial flow jet fan of long throw
- 8.7. Development of a standardised axial fan test facility for testing industrial fans of serial production
- 8.8. Fluid mechanical survey of a gas turbine power plant
- 8.9. Testing a wind tunnel fan by means of ad hoc measurements [58]
- 8.10. Study on the effect of flow rate measurement noise in a natural gas supply line
- 8.11. Investigation of the cooling process applied in sheet metal industry
- 8.12. Heat power measurement applied in a remote heating system
- 8.13. Investigation of a chemical industrial solvent supply system
- 8.14. Testing compressors used in air conditioners for cars
- 8.1. Extension of a food industry cooler system
- REFERENCES
Kiadó: Akadémiai Kiadó
Online megjelenés éve: 2020
ISBN: 978 963 454 484 5
This lecture note aims at providing basic information on nowadays applied fluid flow measurement techniques, in terms of their operating principle, layouts, application areas, advantages, and limitations. As such, it intends to give an aid in decision-making when selecting instrumentation for the solution of various practical flow measurement problems, also providing hints for the actual realisation of the measurements.
Hivatkozás: https://mersz.hu/vad-lukacs-fluid-mechanics-measurements//
BibTeXEndNoteMendeleyZotero
gomb segítségével választhatsz, hogy fejezetről fejezetre lapozva vagy inkább folyamatosan görgetve olvasnád-e a könyvet.
