Sára Till, Péter Csizmadia, Richárd Wéber

Fluid Flow Systems


Sample case 1

In the simple heating network (Figure 6.4), a circulator pump and boiler supply hot water to the three radiators (HE-A, HE-B and HE-C), which flows back to the pump when cooled. The parameters are: the characteristic curve of the pump, the thermal power output of the boiler, the heat exchanger heat rate coefficient, the loss factor and the reference cross-section of the three heat exchangers, the length, diameter and friction factors of pipes 1 and 5 and the geodetic heights of the nodes. We shall find the pressure, mass flow rate, temperature and density.

Fluid Flow Systems

Tartalomjegyzék


Kiadó: Akadémiai Kiadó

Online megjelenés éve: 2024

ISBN: 978 963 664 044 6

This university textbook is the joint work of the colleagues of the Department of Hydrodynamic Systems, Faculty of Mechanical Engineering at the Budapest University of Technology and Economics. Its main aim is to help students deepen their knowledge of the subject Fluid Flow Systems. It also provides a brief historical overview and a basic introduction to fluid mechanics. It discusses each chapter in varying degrees of detail based on the course material. At the end of each chapter, check questions guide students in their learning.

Hivatkozás: https://mersz.hu/till-csizmadia-weber-fluid-flow-systems//

BibTeXEndNoteMendeleyZotero

Kivonat
fullscreenclose
printsave